The PetAg Bottle is designed for feeding orphaned, newborn, or sick puppies, kittens, and other small animals that cannot nurse from their mothers. To ensure safe and proper feeding, follow this step-by-step guide.

Step 1: Prepare the Bottle and Nipple

1. Wash the PetAg Bottle, nipple, and cap with warm, soapy water before first use.
2. Rinse thoroughly and allow it to air dry to remove any soap residue.
3. If the nipple is not pre-cut, use a sterilized needle or small scissors to create a small hole for controlled milk flow.

See Also — Pooph Litterizer: How to Use for Maximum Odor Control

Step 2: Prepare the Formula

1. Use a milk replacer suitable for your pet’s species (e.g., PetAg Esbilac for puppies or KMR for kittens).
2. Follow the mixing instructions on the formula packaging.
3. Warm the formula by placing the bottle in a bowl of warm water (do not microwave).
4. Shake well and test the temperature by dripping a few drops on your wrist—it should be warm, not hot.

Step 3: Position Your Pet Correctly

1. Hold your pet in a natural nursing position (belly down, never on its back).
2. Gently insert the nipple into the pet’s mouth and squeeze the bottle lightly to release a drop of milk.
3. Allow the pet to suckle naturally, ensuring a slow and steady feeding pace.

Step 4: Monitor Feeding and Adjust as Needed

1. Watch for steady swallowing—if milk flows too fast, use a smaller hole in the nipple.
2. Feed your pet every 2–3 hours for newborns, adjusting frequency as they grow.
3. Stop feeding if your pet appears full, refuses the bottle, or becomes too tired.

See Also — NasaMist Saline Spray: How to Use for Effective Nasal Relief

Step 5: Burp and Clean Up

1. Gently burp your pet by rubbing or patting its back to release air bubbles.
2. Clean the PetAg Bottle and nipple after each use with warm soapy water and rinse thoroughly.

Additional Tips for Best Results

✔ Always use species-specific formula—never give cow’s milk.
✔ Ensure the formula is fresh and properly stored.
✔ Keep the feeding area calm and quiet to prevent stress.
✔ Adjust the nipple size if too much or too little milk flows.

See Also — Otezla Starter Pack: How Many Days Does It Last?

Conclusion

The PetAg Bottle is an essential tool for feeding orphaned or sick animals. By properly preparing formula, positioning your pet correctly, and monitoring feeding, you can ensure safe and healthy nourishment. Regular cleaning and careful handling will help keep your pet comfortable and well-fed.

FAQs

1. How often should I feed a newborn pet using the PetAg Bottle?

Newborns need feeding every 2–3 hours, including nighttime. As they grow, reduce frequency.

2. What if my pet refuses the PetAg Bottle?

Try warming the formula slightly, checking the nipple size, or stimulating sucking by gently rubbing the mouth.

3. Can I reuse the same formula throughout the day?

No, discard unused formula after 24 hours if refrigerated or 1 hour if left at room temperature.

See Also — How to Use Vichy Mineral 89 Booster Quotidien Fortifiant for Healthy Skin

4. How do I know if the nipple hole is the right size?

Milk should drip slowly when the bottle is turned upside down—not stream out too fast or get stuck.

5. Can I feed a newborn pet on its back?

No! Always feed them in a belly-down position to prevent choking.